* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Bydd eitemau a ddychwelir yn cael eu derbyn o fewn 40 diwrnod o'r dyddiad o dderbyn y nwyddau. Ni ellir dychwelyd na chyfnewid eitemau wedi'u cyfaddasu. Ni ellir dychwelyd eitemau a brynwyd gyda cherdyn rhodd e; dim ond cyfnewid y gellir eu gwneud.
Rhodd Am Ddim
Croeso i Roymall, eich gwefan broffesiynol ar gyfer prynu rhoddion siopau adran premium. Rydym yn gwerthfawrogi ac yn gwerthfawrogi eich cefnogaeth, ac rydym am fynegi ein diolch trwy ychwanegu cyffro ychwanegol at eich pryniadau. Pan fyddwch yn siopa gyda ni, nid yn unig y byddwch yn cael mwynhau cynnyrch o ansawdd uchel sy'n gwella eich ffordd o fyw, ond byddwch hefyd yn derbyn rhodd am ddim gyda phob archeb a wnewch. Barod i archwilio ein casgliad a dod o hyd i'ch rhoddion perffaith? Poriwch ein dewis o eitemau siop adran premium, gwneud eich archeb, ac edrych ymlaen at y cyffro o gael eich rhodd am ddim yn dod ochr yn ochr â'ch pryniad.
Polisi Cludo
Byddwn yn gweithio'n galed i gyflwyno eitemau atoch ar ôl derbyn eich archebion a sicrhau eu bod yn cyrraedd yn ddiogel. Bydd manylion cludo yn cael eu darparu yn eich e-bost cadarnhau.Yn y rhan fwyaf o achosion, mae archebion yn cael eu prosesu o fewn 2 ddiwrnod.O dan amgylchiadau arbennig, bydd yn cael ei oedi fel a ganlyn: Pan fyddwch yn gwneud archeb ar ddydd Sadwrn, dydd Sul neu wyliau cyhoeddus, bydd yn cael ei oedi am 2 ddiwrnod..Yn nodweddiadol, mae angen 5-7 diwrnod gwaith (dydd Llun i ddydd Gwener) heb gael eu heffeithio gan oedi hedfan neu ffactorau amgylcheddol eraill..Gan fod ein gwasanaeth cludo yn fyd-eang, bydd yr amseroedd cludo yn dibynnu ar eich lleoliad, felly gall gymryd ychydig o amser ac, os gwelwch yn dda, aros yn amyneddgar os ydych yn ardaloedd neu wledydd anghysbell.
1. Polisi Dychwelyd a Chyfnewid
Dim ond eitemau a brynwyd ar roymall.com y byddwn yn eu derbyn. Os ydych yn prynu gan ein dosbarthwyr lleol neu fanwerthwyr eraill, ni allwch eu dychwelyd atom ni.Ni fydd eitemau gwerthu terfynol neu roddion am ddim yn cael eu derbyn ar gyfer dychwelyd.I fod yn gymwys i'w dychwelyd, rhaid i'ch eitem fod yn heb ei defnyddio ac yn yr un cyflwr ag yr oedd pan gawsoch hi. Rhaid iddi hefyd fod yn y pecyn gwreiddiol.Ar ôl derbyn cyfarwyddiadau dychwelyd gennym, os gwelwch yn dda, pecynwch eich eitemau a ddychwelwyd a gollwng eich pecyn yn y swyddfa bost leol neu gludwr arall. Byddwn yn prosesu'ch eitem a ddychwelwyd neu a gyfnewidir o fewn 3-5 diwrnod gwaith ar ôl iddo gyrraedd. Bydd yr ad-daliad yn cael ei brosesu a'i gredyd yn awtomatig i'ch dull talu gwreiddiol.Ni ellir derbyn dychweliadau na chyfnewidiadau os cafodd y cynnyrch ei gynhyrchu'n bersonol, gan gynnwys maint wedi'i gyfaddasu, lliw wedi'i gyfaddasu neu argraff wedi'i gyfaddasu.Angen mwy o help, os gwelwch yn dda, cysylltwch â ni. service@roymall.com neu Whatsapp: +447549870296
2.Polisi Ad-dalu
Byddwch yn cael ad-daliad llawn neu gredyd siop 100% ar ôl i ni dderbyn y pecyn a ddychwelwyd a'i wirio. Bydd yr ad-daliad yn cael ei brosesu a'i gredyd yn awtomatig i'ch dull talu gwreiddiol.Sylwch nad yw costau cludo ac unrhyw drethi neu ffi yn cael eu had-dalu. Nid yw'r costau cludo ychwanegol yn cael eu had-dalu ar ôl i'r pecyn gael ei anfon. Rydych chi'n gyfrifol am dalu'r ffioedd hyn, ac ni allwn eu hosgoi na'u had-dalu, hyd yn oed os yw'r archeb yn cael ei dychwelyd atom ni.Ar ôl derbyn a chadarnhau'ch eitem a ddychwelwyd, byddwn yn anfon e-bost atoch i'ch hysbysu ein bod wedi derbyn eich eitem a ddychwelwyd. Byddwn hefyd yn eich hysbysu am gymeradwyo neu wrthod eich ad-daliad.Os oes gennych unrhyw broblemau ynghylch y broses ad-dalu, os gwelwch yn dda, cysylltwch â ni. service@roymall.com neu Whatsapp: +447549870296
Description:
>>>Manual: Click here to open<<<This microcontroller development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with. Running on 16MHz and 5V, this board will remind you a lot of other compatible boards that you like. There is a voltage regulator on board, so it can accept up to 12V DC. If you are supplying an unstable power supply board, be sure to connect to the "RAW" not on the VCC pin. We have also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits. Feature: - ATMEGA32U4 running in 5V / 16MHz- Support IDE V1.0.1- Micro USB interface programming on the board- Four 10-bit ADC pin- 12 digital I / O (5 PWM capability)- Rx and Tx hardware serial connection Package included: 1 x Module
So amazingly tiny, I am looking forward to finding new projects for me to use these on...
If you plan to be plugging and unplugging the board, for development or otherwise, be sure to support the micro USB port (I encased the entire end of the board in clear epoxy, leaving just the solder pads clear), as they are prone to break off with use...
So amazingly tiny, I am looking forward to finding new projects for me to use these on...
If you plan to be plugging and unplugging the board, for development or otherwise, be sure to support the micro USB port (I encased the entire end of the board in clear epoxy, leaving just the solder pads clear), as they are prone to break off with use...
So amazingly tiny, I am looking forward to finding new projects for me to use these on...
If you plan to be plugging and unplugging the board, for development or otherwise, be sure to support the micro USB port (I encased the entire end of the board in clear epoxy, leaving just the solder pads clear), as they are prone to break off with use...
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
No. It is based on the same microcontroller, but the pin configuration is different. You should be able to get the same software to work, but you won't have access to all the pins that you would on a teensy 2.0.
No. It is based on the same microcontroller, but the pin configuration is different. You should be able to get the same software to work, but you won't have access to all the pins that you would on a teensy 2.0.
Yes it's a 32u4 board, put the right sketch on it through the Arduino IDE, attach some buttons and it'll function as a macro keyboard.
Yesit's a 32u4 board, put the right sketch on it through the Arduino IDE, attach some buttons and it'll function as a macro keyboard.
Answered by UFK101 on 09/10/2021Helpful (0)
0
Q:
How can I program/upload an sketch to the Pro Micro ?
It is not recognized as a Serial USB device (tested both in windows 7 and Linux ubuntu) Edit: Ive found out. The usb cable was the cause. For unknown reason, some cables I use with other devices, didnt work.
In linux with a proper cable it was plug and play (Arduino/Genuino Micro selected in Arduino GUI). In windows I have to install some Sparkfun drivers.
How can I program/upload an sketch to the Pro Micro ?
It is not recognized as a Serial USB device (tested both in windows 7 and Linux ubuntu) Edit: Ive found out. The usb cable was the cause. For unknown reason, some cables I use with other devices, didnt work.
In linux with a proper cable it was plug and play (Arduino/Genuino Micro selected in Arduino GUI). In windows I have to install some Sparkfun drivers.
Hello, Is this board usable as a usb device (like a Genuine Arduino Micro) and how many pins usable as Digital I/O pins are there ? (because I count more than 15) Thank you
Hello, Is this board usable as a usb device (like a Genuine Arduino Micro) and how many pins usable as Digital I/O pins are there ? (because I count more than 15) Thank you
If using the arduino IDE in windows 10 you need the sparkfun drivers.
If using the arduino IDE in windows 10 you need the sparkfun drivers.
Answered by thomassharratt on 07/05/2020Helpful (0)
0
Q:
I expected the Rx and Tx LEDs to be yellow and green, but it seems they are both red, just like the power LED. Why aren't the LEDs different colours like on other Pro Micro boards?
I expected the Rx and Tx LEDs to be yellow and green, but it seems they are both red, just like the power LED. Why aren't the LEDs different colours like on other Pro Micro boards?
does this micro controller show up as a keyboard and mouse like the real arduino micro/leonardo? if so. is it compatible with the game controller library?
does this micro controller show up as a keyboard and mouse like the real arduino micro/leonardo? if so. is it compatible with the game controller library?
This microcontroller is displayed as a keyboard and mouse like the real arduino micro / leonardo, and it is compatible with the game controller library.
This microcontroller is displayed as a keyboard and mouse like the real arduino micro / leonardo, and it is compatible with the game controller library.
Answered by wujiahui on 07/04/2019Helpful (0)
Ask a Question
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.